Also called a Lost Call. The caller hangs up before reaching an agent.
See Wrap-Up Codes.
A general term that refers to how well agents adhere to their schedules. Can include both a) how much time they were available to take calls during their shifts, including the time spent handling calls and the time spent waiting for calls to arrive (also called Availability), and b) when they were available to take calls (also called Compliance or Adherence). See Real-Time Adherence Software and Occupancy.
Also called Wrap-up and Post Call Processing (PCP). Work that is necessitated by and immediately follows an inbound transaction. Often includes entering data, filling out forms and making outbound calls necessary to complete the transaction. The agent is unavailable to receive another inbound call while in this mode.
The person who handles incoming or outgoing calls. Also referred to as customer service representative (CSR), telephone sales or service representative (TSR), rep, associate, consultant, engineer, operator, technician, account executive, team member, customer service professional, staff member, attendant and specialist. Agents. -See Average Number of Agents.
Also called Split, Gate, Queue or Skills Group. A collection of agents that share a common set of skills, such as being able to handle customer complaints.
An outbound call placed by an agent.
The mode an agent is in (Talk Time, After-Call Work, Unavailable, etc.).
When all trunks are busy in a specified trunk group. Generally, reports indicate how many times all trunks were busy, and how much total time all trunks were busy. What they don’t reveal is how many callers got busy signals when all trunks were busy.
Analog. Telephone transmission or switching that is not digital. Signals are analogous to the original signal.
A recorded verbal message played to callers.
The signal sent by the ACD or other device to the local or long distance carrier to accept a call. ThatÍs when billing for either the caller or the call center will begin, if long distance charges apply.
When referring to an agent group, a call counted as answered when it reaches an agent.
Application Based Routing and Reporting. The ACD capability to route and track transactions by type of call, or application (e.g., sales, service, etc.), versus the traditional method of routing and tracking by trunk group and agent group.
The basic design of a system. Determines how the components work together, system capacity, upgradeability, and the ability to integrate with other systems.
A voice processing capability that enables callers to automatically access pre-recorded announcements. See Voice Processing.
An ACD feature whereby the ACD is programmed to automatically put agents into Available after they finish Talk Time and disconnect calls. If they need to go into After-Call Work, they have to manually put themselves there. See Auto Wrap-up.
Agent’s pre-recorded greeting that plays automatically when a call arrives.
An ACD feature whereby the ACD is programmed to automatically put agents into After-Call Work after they finish Talk Time and disconnect calls. When they have completed any After-Call Work required, they put themselves back into Available. See Auto Available.
Automated Attendant. A voice processing capability that automates the attendant function. The system prompts callers to respond to choices (e.g., press one for this, two for thatƒ”) and then coordinates with the ACD to send callers to specific destinations. This function can reside in an on-site system or in the network.
The specialized telephone system used in incoming call centers. It is a programmable device that automatically answers calls, queues calls, distributes calls to agents, plays delay announcements to callers and provides real-time and historical reports on these activities. May be a stand-alone system, or ACD capability built into a CO, network or PBX.
A simple system that is less sophisticated than an ACD, but provides some ACD-like functionality.
A telephone network feature that passes the number of the phone the caller is using to the call center, real-time. ANI may arrive over the D channel of an ISDN PRI circuit (out of band signaling), or before the first ring on a single line (inband signaling). ANI is delivered from long distance companies. Caller ID is the local phone company version of ANI, and is delivered inband. ANI is a North American term, and Calling Line Identification (CLI) is an alternative term used elsewhere.
An agent work state that is typically not associated with handling telephone calls. When agents are in an auxiliary mode, they will not receive inbound calls.
Availability. See Adherence to Schedule.
Available State. Agents who are signed on to the ACD and waiting for calls to arrive.
Available Time. The total time that an agent or agent group waited for calls to arrive, for a given time period.
See Average Speed of Answer.
The average delay of calls that are delayed. It is the total Delay for all calls divided by the number of calls that had to wait in queue. See Average Speed of Answer.
The sum of Average Talk Time and Average After-Call Work for a specified time period.
The average time inbound transactions occupy the trunks. It is: (Talk Time + Delay Time)/Calls Received. AHT is also an acronym for Average Handling Time, which has a different meaning.
The average number of agents logged into a group for a specified time period.
Also called Average Delay. The average delay of all calls. It is total Delay divided by total number of calls. See Average Delay of Delayed Calls.
The average time that callers wait in queue before abandoning. The calculation considers only the calls that abandon.
The minimum number of agents required to achieve service level and response time objectives for given period of time. Seated agent calculations assume that agents will be ñin their seatsî for the entire period of time. Therefore, schedules need to add in extra people to accommodate breaks, absenteeism and other factors that will keep agents from the phones. See Rostered Staff Factor.
One of two basic levels of ISDN service. A BRI line provides two bearer channels for voice and data and one channel for signaling (commonly expressed as 2B+D). See Primary Rate Interface (PRI) and Integrated Services Digital Network.
An audible notification that a call has arrived (also called Zip Tone). Beep tone can also refer to the audible notification that a call is being monitored.
Historically, a term referred to as a standardized task to test the capabilities of devices against each other. In quality terms, benchmarking is comparing products, services and processes with those of other organizations, to identify new ideas and improvement opportunities.
A benchmarking term to identify organizations that outperform all others in a specified category.
Callers blocked from entering a queue. See Blocked Call.
A call that cannot be connected immediately because A) no circuit is available at the time the call arrives, or B) the ACD is programmed to block calls from entering the queue when the queue backs up beyond a defined threshold.
A telephone traffic engineering term, referring to the hour of time in which a trunk group carries the most traffic during the day. The average busy hour reflects the average over a period of days, such as two weeks. Busy Hour has little use for incoming call centers, which require more specific resource calculation methodologies.
Also called Transaction and Customer Contact. A term referring to telephone calls, video calls, Web calls and other types of contacts.
Combining traditionally separate inbound and outbound agent groups into one group of agents responsible for handling both inbound and outbound contacts. A system that is capable of call blending automatically puts agents who are making outbound calls into the inbound mode and vice versa, as necessitated by the incoming call load.
The process of routing each call to the optimum destination according to real-time conditions. See Percent Allocation and Network Inter-flow.
An umbrella term that generally refers to reservations centers, help desks, information lines or customer service centers, regardless of how they are organized or what types of transactions they handle. The term is being challenged by many, because calls are just one type of transaction and the word center doesnÍt accurately depict the many multi-site environments.
The set of criteria the ACD uses to process calls. Examples include routing criteria, overflow parameters, recorded announcements and timing thresholds.
Data on each call, captured and stored by the ACD. Can include trunk used, time in queue, call duration, agent who handled the call, number dialed (for outgoing), and other information.
An ACD feature that automatically delivers calls to agents who are available and ready to take calls. They hear a notification that the call has arrived (e.g. a beep tone), but do not have to press a button to answer the call.
Also referred to as Work Load. Call Load is the product of (Average Talk Time + Average After-Call Work) x call volume, for a given period.
See Automatic Number Identification.
Digits callers enter using their telephone keypads. The ACD, VRU, or network can prompt for CEDs.
See Automatic Number Identification.
A real-time report that refers to the number of calls received by the ACD system but not yet connected to an agent.
A company that provides telecommunications circuits. Carriers include both local telephone companies and long distance providers.
A tool to assist in root cause identification, developed by Dr. Kaoru Ishikawa.
These discs hold as much as 660 megabytes of memory.
Can refer to either a telephone company switching center or the type of telephone switch used in a telephone company switching center. The local central office receives calls from within the local area and either routes them locally or passes them to an inter-exchange carrier (IXC). On the receiving end, the local central office receives calls that originated in other areas, from the IXC.
100 call seconds, a unit of telephone traffic measurement. The first C is the Roman numeral for 100. 1 hour = 1 Erlang = 60 minutes = 36 CCS.
A typical title for the highest ranking executive responsible for an organization’s information systems.
A transmission path between two points in a network.
A network of computers that share capabilities and devices.
Non-phone tasks (e.g., data entry) that are flexible, and can be scheduled for periods when call load is slow.
Causes of variation that are inherent to a process over time. They cause the rhythmic, common variations in the system of causes, and they affect every outcome of the process and everyone working in the process. See Special Causes.
See Adherence to Schedule.
A computer technique to predict the outcome of various events in the future, given many variables. When there are many variables, simulation is often the only way to reasonably predict the outcome.
The software, hardware and programming necessary to integrate computers and telephones so they can work together seamlessly and intelligently.
The capability of the ACD to route calls based on current conditions. It is based on “if-then” programming statements. For example, “if the number of calls in agent group 1 exceeds 10 and there are at least 2 available agents in group two, then route the calls to group two.”
The ongoing improvement of processes.
A control chart sifts out (identifies) two types of variation in a process, common causes and special causes. See Common Causes and Special Causes.
The capability of the ACD to generate busy signals when the queue backs up beyond a programmable threshold.
An accounting term that refers to a department or function in the organization that does not generate profit. See Profit Center.
The money you pay to queue callers, assuming you have toll-free service.
Total costs (fixed and variable) divided by total calls for a given period of time.
Customer Contact. See Call.
A CTI application, whereby the ACD works in sync with the database computer to process calls, based on information in the database. For example, a caller inputs digits into a voice processing system, the database retrieves information on that customer and then issues instructions to the ACD on how to handle the call (e.g., where to route the call, what priority the call should be given in queue, the announcements to play, etc.).
A network service that routes calls to alternate locations, based on the day of week. There are also options for day of year and time of day routing.
Recorded announcements that encourage callers to wait for an agent to become available, remind them to have their account number ready, and provide information on access alternatives. In some systems, delay announcements are provided through recorded announcement routes (RANs).
Also called Queue Time. The time a caller spends in queue, waiting for an agent to become available. Average Delay is the same thing as Average Speed of Answer. Also see Average Delay of Delayed Calls.
A call which cannot be answered immediately and is placed in queue.
The number that the caller dialed to initiate the call.
A string of digits that the telephone network passes to the ACD, VRU or other devise, to indicate which number the caller dialed. The ACD can then process and report on that type of call according to user-defined criteria. One trunk group can have many DNIS numbers.
The use of a binary code Ü 1s and 0s Ü to represent information.
Direct Call Processing. See Talk Time.
A signaling system that sends pairs of audio frequencies to represent digits on a telephone keypad. It is often used interchangeably with the term Touchtone (an AT&T trademark).
An ACD feature that automatically reconfigures the number of rings before the system answers calls, based on real-time queue information. Since costs donÍt begin until the ACD answers calls, this feature can save callers or the call center money when long distance charges apply.
Electronic text mail.
A strategy whereby enough agents are scheduled for the day or week to handle both the inbound call load and other types of work. Priorities are based on the inbound call load. When call load is heavy, all agents handle calls, but when it is light, some agents are reassigned to work that is not as time-sensitive.
A formula developed by A.K. Erlang, widely used to determine the number of trunks required to handle a known calling load during a one hour period. The formula assumes that if callers get busy signals, they go away forever, never to retry (ñlost calls clearedî). Since some callers retry, Erlang B can underestimate trunks required. However, Erlang B is generally accurate in situations with few busy signals.
Calculates predicted waiting times (delay) based on three things: the number of servers (reps); the number of people waiting to be served (callers); and the average amount of time it takes to serve each person. It can also predict the resources required to keep waiting times within targeted limits. Erlang C assumes no lost calls or busy signals, so it has a tendency to overestimate staff required.
A Danish engineer who worked for the Copenhagen Telephone Company in the early 1900s and developed Erlang B, Erlang C and other telephone traffic engineering formulas.
One hour of telephone traffic in an hour of time. For example, if circuits carry 120 minutes of traffic in an hour, that’s two Erlangs.
Either the number of defective transactions or the number of defective steps in a transaction.
Escalation Plan. A plan that specifies actions to be taken when the queue begins to build beyond acceptable levels.
A brief summary of the key points of a more detailed report or study.
Technology that scans a document, encodes it, transmits it over a telecommunications circuit, and reproduces it in original form at the receiving end.
A caller who hangs up immediately when they hear a delay announcement.
A system that enables callers to request documents, using their telephone keypads. The selected documents are delivered to the fax numbers they specify.
A step by step diagram of a process.
Changing system thresholds so that calls waiting for an agent group are redirected to another group with a shorter queue or available agents.
A term used in scheduling and budgeting, whereby the number of scheduled hours is divided by the hours in a full work week. The hours of several part time agents may add up to one FTE.
See Agent Group.
A server dedicated to providing access to a network.
The probability that a call will not be connected to a system because all trunks are busy. Grade of service is often expressed as “p.01” meaning 1% of calls will be “blocked.” Sometimes, grade of service is used interchangeably with service level, but the two terms have different meanings. See Service Level.
The number of calls received and handled by agents or peripheral equipment. Handled calls does not include calls that abandon or receive busy signals.
The time an agent spends in Talk Time and After-Call Work, handling a transaction. Handling Time can also refer to the time it takes for a machine to process a transaction.
A term that generally refers to a call center set up to handle queries about product installation, usage or problems. The term is most often used in the context of computer software and hardware support centers.
Reports that track call center and agent performance over a period of time. Historical reports are generated by ACDs, third party ACD software packages, and peripherals such as VRUs and Call Detail Recording Systems. The amount of history that a system can store varies by system.
See Average Holding Time on Trunks.
A process whereby documents are scanned into a system and stored electronically.
A law of nature that is fundamental, and not changeable (e.g., the law of gravity). In an inbound call center, the fact that occupancy goes up when service level goes down, is an immutable law.
The art of having the right number of skilled people and supporting resources in place at the right times to handle an accurately forecasted workload, at service level and with quality.
A methodology that estimates the value (cost and revenue) of adding or subtracting an agent.
In forecasting, a proportion used as a multiplier to adjust another number.
A set of international standards for telephone transmission. ISDN provides an end-to-end digital network, out-of-band signaling, and greater bandwidth than older telephone services. The two standard levels of ISDN are Basic Rate Interface (BRI) and Primary Rate
See Basic Rate Interface and Primary Rate Interface.
A long-distance telephone company.
See Voice Response Unit.
A group that supports other internal agent groups, e.g. for complex or escalated calls.
The time it takes an agent group that supports other internal groups (e.g., for complex or escalated tasks) to respond to transactions that do not have to be handled when they arrive (e.g., correspondence or e-mail). See Response Time and Service Level.
A transaction that allows a user to request a callback from the call center, while exploring a Web page. Requires interconnection of the ACD system and the Internet by means of an Internet Gateway.
The ability for callers to click a button on a Web site and be directly connected to an agent while viewing the site. Standards and technologies that provide this capability are in development.
Internet Phone. Technology that enables users of the InternetÍs World Wide Web to place voice telephone calls through the Internet, thus by-passing the long distance network.
When callers do not know how long the queue is or how fast it is moving. See Visible Queue.
Goes beyond purely statistical techniques and encompasses what people believe is going to happen. It is in the realm of intuition, interdepartmental committees, market research and executive opinion.
The declining marginal improvements in service level that can be attributed to each additional agent, as successive agents are added.
Balancing traffic between two or more destinations.
The connection of multiple computers within a building, so that they can share information, applications and peripherals. See Wide Area Network.
Telephone companies responsible for providing local connections and services.
A state in which agents have signed on to a system (made their presence known), but may or may not be ready to receive calls.
For staffing calculations and traffic engineering purposes, calls that approach or exceed thirty minutes.
A method of distributing calls to the agent who has been sitting idle the longest. With a queue, Longest Available Agent becomes ñNext Available Agent.î
The longest time a caller has waited in queue, before abandoning or reaching an agent.
The ability for a system or network to examine a secondary queue and evaluate the conditions, before overflowing calls from the primary queue.
The ability for a system or network to look back to the primary queue after the call has been overflowed to a secondary queue, and evaluate the conditions. If the congestion clears, the call can be sent back to the initial queue.
See Abandoned Call.
Software that mediates between different types of hardware and software on a network, so that they can function together.
A contraction of the terms Modulator/Demodulator. A Modem converts analog signals to digital and vice versa.
Also called Position Monitoring or Service Observing. The process of listening to agents’ telephone calls for the purpose of maintaining quality. Monitoring can be: A) silent, where agents don’t know when they are being monitored, B) side by side, where the person monitoring sits next to the agent and observes calls or C) record and review, where calls are recorded and then later played back and assessed.
Agents that are fluent in more than one language.
Combining multiple forms of media in the communication of information. (E.g, a traditional phone call is “monomedia,” and a video call is “multimedia.”)
If anything can go wrong, it will. Not a good perspective to live by, but worth considering when designing agent groups, routing configurations and disaster recovery plans.
Also called Traffic Control Center. In a networked call center environment, where people and equipment monitor real-time conditions across sites, change routing thresholds as necessary, and coordinate events that will impact base staffing levels.
A technology used in multi-site call center environments to create a more efficient distribution of calls between sites. Through integration of sites using network circuits (such as T1 circuits) and ACD software, calls routed to one site may be queued simultaneously for agent groups in remote sites. See Call by Call Routing and Percent Allocation.
A call distribution method that sends calls to the next agent who becomes available. The method seeks to maintain an equal load across skill groups or services. When there is no queue, Next Available Agent reverts to Longest Available Agent.
Headsets equipped with technology that reduces background noise.
Inbound calls which are directed to an agent’s extension, rather than to a general group. These may be personal calls or calls from customers who dial the agents’ extension numbers.
Also referred to as agent utilization. The percentage of time agents handle calls versus wait for calls to arrive. For a half-hour, the calculation is: (call volume x average handling time in seconds) / (number of agents x 1800 seconds). See Adherence to Schedule.
Hardware or software programs that are commercially available and ready for use “as is.”
All of the attempts callers make to reach the call center. There are three possibilities for offered calls: 1) they can get busy signals, 2) they can be answered by the system, but hang up before reaching a rep, 3) they can be answered by a rep. Offered call reports in ACDs usually refer only to the calls that the system receives.
Periods of time other than the call center’s busiest periods. Also a term to describe periods of time when long distance carriers provide lower rates.
A customer contact (transaction) that has not yet been completed or resolved (closed).
Contracting some or all call center services to an outside company.
Calls that flow from one group or site to another. More specifically, Intraflow happens when calls flow between agent groups and Interflow is when calls flow out of the ACD to another site.
See Rostered Staff Factor.
A bar chart that arranges events in order of frequency. Named after 19th century economist Vilfredo Pareto.
A PBX that is equipped with ACD functionality.
Peaked Call Arrival. A surge of traffic beyond random variation. It is a spike within a short period of time.
Acall routing strategy sometimes used in multi-site call center environments. Calls received in the network are allocated across sites based on user-defined percentages. See Call by Call Routing and Network Inter-flow.
A formula sometimes used for calculating trunks. Assumes that if callers get busy signals, they keep trying until they successfully get through. Since some callers won’t keep retrying, Poisson can overestimate trunks required. See Erlang B and Retrial Tables.
The Pooling Principle states: Any movement in the direction of consolidation of resources will result in improved traffic-carrying efficiency. Conversely, any movement away from consolidation of resources will result in reduced traffic-carrying efficiency.
See After-Call Work.
A system that automatically places outbound calls and delivers answered calls to agents. When the dialer detects busy signals, answering machines or ring no answer, it puts the number back in queue.
One of two levels of ISDN service. In North America, PRI typically provides 23 bearer channels for voice and data and one channel for signaling information (commonly expressed as 23B+D). In Europe, PRI typically provides 30 bearer lines (30B+D). See Basic Rate Interface and Integrated Services Digital Network.
See Private Branch Exchange.
A telephone system located at a customer’s site that handles incoming and outgoing calls. ACD software can provide PBXs with ACD functionality. Also called private automatic branch exchange (PABX).
A network made up of circuits for the exclusive use of an organization or group of affiliated organizations. Can be regional, national or international in scope and are common in large organizations.
A system of causes.
An accounting term that refers to a department or function in the organization that does not generate profit. See Cost Center.
The public telephone network which provides the capability of interconnecting any home or office with any other.
Using statistical techniques to forecast future events. The major categories of quantitative forecasting include Time Series and Explanatory approaches. Time Series techniques use past trends to forecast future events. Explanatory techniques attempt to reveal linkages between two or more variables. See Judgmental Forecasting.
Holds callers until an agent becomes available. Queue can also refer to a line or list of items in a system waiting to be processed (e.g., e-mail messages).
The normal, random variation in how incoming calls arrive. See Peaked Call Arrival.
Also called displayboards or wall displays. A visual display, usually mounted on the wall or ceiling, that provides real-time and historical information on queue conditions, agent status and call center performance.
Software that tracks how closely agents conform to their schedules. See Adherence to Schedule.
Information on current conditions. Some “real-time” information is real-time in the strictest sense (e.g., calls in queue and current longest wait). Some real-time reports require some history (e.g. the last x calls or x minutes) in order to make a calculation (e.g. service level and average speed of answer). See Screen Refresh.
Making adjustments to staffing and thresholds in the systems and network, in response to current queue conditions.
A call detected and seized by a trunk. Received calls will either abandon or be answered by an agent.
Record and Review Monitoring. See Monitoring.
See Delay Announcement.
A term popularized by management consultant Michael Hammer, which refers to radically redesigning processes to improve efficiency and service.
The time it takes the call center to respond to transactions that do not have to be handled when they arrive (e.g., correspondence or e-mail). See Service Level.
Sometimes used to calculate trunks and other system resources required. They assume that some callers will make additional attempts to reach the call center if they get busy signals. See Erlang B and Poisson.
A caller who “retries” when they get a busy signal.
Alternatively called an Overlay, Shrink Factor or Shrinkage. RSF is a numerical factor that leads to the minimum staff needed on schedule over and above base staff required to achieve your service level and response time objectives. It is calculated after base staffing is determined and before schedules are organized, and accounts for things like breaks, absenteeism and ongoing training.
A method of distributing calls to agents according to a predetermined list. See Next Available Agent and Longest Waiting Agent.
A chart that graphically depicts the relationship between two variables.
See Adherence to Schedule.
When an agent is involved in an activity outside of the normal, planned schedule.
A system capability that enables a supervisor or manager to remotely monitor the activity on agents’ computer terminals.
A CTI capability. Callers’ records are automatically retrieved (based on ANI or digits entered into the VRU) and delivered to agents, along with the calls.
The rate at which real-time information is updated on a display (e.g. every 5 to 15 seconds). Note, screen refresh does not correlate with the time-frame used for real-time calculations. See Real-Time Data.
See Base Staff.
A company that handles inbound or outbound calls for another organization.
Performance objectives reached by consensus between the user and the provider of a service, or between an outsourcer and an organization. A service level agreement specifies a variety of performance standards that may or may not include “service level.” See Service Level.
Also called Telephone Service Factor, or TSF. The percentage of incoming calls that are answered within a specified threshold: “X% of calls answered in Y seconds.” See Response Time.
See Rostered Staff Factor.
See Agent Group.
An ACD capability that matches a caller’s specific needs with an agent that has the skills to handle that call, on a real-time basis.
Calls that arrive evenly across a period of time. Virtually non-existent in incoming environments.
Variation in a process caused by special circumstances. See Common Causes.
The capability of a voice processing system to decipher spoken words and phrases.
Split. See Agent Group.
Computer monitors that enable supervisors to monitor the call handling statistics of their supervisory groups or teams.
The person who has front-line responsibility for a group of agents. Typical ratios are one supervisor to every 10-15 agents. However, help desks can have one supervisor for every 5 people, and some reservations centers have one supervisor for every 30 or 40 agents. Generally, supervisors are equipped with special telephones and computer terminals that enable them to monitor agent activities.
A high speed digital circuit used for voice, data or video, with a bandwidth of 1.544 megabits per second. T1 circuits offer the equivalent of twenty-four (24) analog voice trunks.
The time an agent spends with a caller during a transaction. Includes everything from “hello” to “goodbye.”
Using telecommunications to work from home or other locations instead of at the organization’s premises.
See Service Level.
CTI protocol developed by Microsoft and Intel.
CTI protocol developed by Novell and AT&T.
The point at which an action, change or process takes place.
A private circuit that connects two ACDs or PBXs across a wide area.
Enables callers to reach a call center out of the local calling area without incurring charges. 800 and 888 service is toll-free. In some countries, there are also other variations of toll-free service. For example, with 0345 or 0645 services in the United Kingdom, callers are charged local rates and the call center pays for the long distance charges.
A trademark of AT&T. See Dual-Tone Multifrequency.
See Network Control Center
The protocols that govern the exchange of sequential data. TCP/IP was designed by the U.S. Department of Defense to link dissimilar computers across many kinds of networks. It has since become a common standard for commercial equipment and applications.
True Calls Per Hour. Actual calls an individual or group handled divided by occupancy for that period of time.
Also called a Line, Exchange Line or Circuit. A telephone circuit linking two switching systems.
A collection of trunks associated with a single peripheral and usually used for a common purpose.
The load that trunks carry. Includes both Delay and Talk Time.
The number of trunks in a trunk group that are non-busy.
The number of trunks in the trunk group that are functional.
An agent work state used to identify a mode not associated with handling telephone calls.
A simple system that distributes calls to a group of agents and provides some reports. A UCD is not as sophisticated as an ACD.
Refers to either A) An agent who can handle all types of incoming calls or B) An agent who can handle both inbound and outbound calls.
A distributed call center that acts as a single site for call handling and reporting purposes.
When callers know how long the queue that they just entered is, and how fast it is moving (e.g., they hear a system announcement that relays the expected wait time). See Invisible Queue.
A blanket term that refers to any combination of voice processing technologies, including Voice Mail, Automated Attendant, Audiotex, Voice Response Unit (VRU) and Faxback.
Also called Interactive Voice Response Unit (IVR) or Audio Response Unit (ARU). A VRU responds to caller entered digits or speech recognition in much the same way that a conventional computer responds to keystrokes or clicks of a mouse. When the VRU is integrated with database computers, callers can interact with databases to check current information (e.g., account balances) and complete transactions (e.g. make transfers between accounts). See Voice Processing.
The connection of multiple computers across a wide area, normally using digital data circuits.
Software systems that, depending on available modules, forecast call load, calculate staff requirements, organize schedules and track real-time performance of individuals and groups.
Often used interchangeably with Call Load. Work load can also refer to non-call activities.
(WWW). The capability that enables users to access information on the internet in a graphical environment.
Codes agents enter into the ACD to identify the types of calls they are handling. The ACD can then generate reports on call types, by handling time, time of day, etc.
See After-Call Work.
See Beep Tone